from 5.213,00 € excl. VAT
Find your dealer Lipo Smart

Lipo Smart

Lipo Smart

With the Lipo Smart, no slope is too steep, because when the forces weaken, the motor supports. Of course, this can also be activated at full muscle power, so that the ride is completely facilitated.

The intelligent pedelec sensor detects the crank movement and powers the motor in various adjustable stages. The hybrid system, together with the different levels, ensures a dynamic ride. However, the sensor does not react to the energy input by the rider, but only to the crank movement. Alternatively, we offer other hybrid systems that differ fundamentally in their driving behavior.

Special feature

From wheelchair to tricycle

With the pre-tensioner, the two castors of the wheelchair are raised, which significantly improves the off-road mobility. Whether cobblestones, gravel and dirt paths, uneven or muddy trails, these nightmare-inducing conditions no longer become an obstacle!

Handbike as sports and leisure equipment

Handbikes have a significant benefit for their riders. Due to the various movements that occur while riding, the muscles can be built up and physical coordination trained.

Product images

Basic equipment

The specifications depend on the model and equipment and may therefore differ. You will receive binding information when ordering or in the offer.

You will find further equipment options under the menu items Tetra equipment (if available), Special equipment and Individualization.

Data sheet

Drive type Pedelec
Engine 250 watt motor power
Speed up to 25 km/h with motor support The strength of the acceleration and the maximum speed depend on the selected speed level.
Battery 36 V, 14 Ah (504Wh)
Charger 36V 1.35 A
Gears SRAM 8-speed with 44/11 Chainring
Wheel size 16 inch, 20 inch or 24 inch
Break V-break and Disc brake Stricker handbikes and power assist devices are always equipped with double mechanical brakes such as coaster brake, V-brake and disc brake. If there is only one type of brake, it is double equipped, e.g. with two brake calipers on one disc brake or one disc brake and one V-brake. In addition, at least one of the existing brakes can be locked in order to park the handbike or power assist device. This ensures full safety.
Transport weight From 16 .5 kg
Total weight From 19 kg
Max. user weight Standard load up to 120 kg user load. More than 120 kg is possible on request.

Equipment

Drive

Illustration can deviate.

Wheel hub motor

The wheel hub motor is a form of drive that is built directly into the wheel. Compared to a mid-mounted motor, there are fewer mechanical components that require maintenance and wear.

Illustration can deviate.

Thumb throttle

The thumb gas is actuated by pressure via the thumb on a lever. Depending on the model and equipment, it is installed instead of or in parallel with the rotary throttle.

Illustration can deviate.

Disc brakes

The braking power of the disc brakes is significantly stronger due to the higher surface pressure compared to the V-brake.

Illustration can deviate.

A

V-break

The V-brake is a simple and straightforward brake that is very accessible.

Illustration can deviate.

Hand crank

The hand crank can be used in pedelec mode or fully manual.

Illustration can deviate.

Chain drive

The chain drive is the most common drive method for pedelecs. It consists of at least one chainring on the crank and a rear derailleur on the wheel, which are connected via the chain.

Illustration can deviate.

SRAM 8-speed

The SRAM circuit is a reliable derailleur.

Illustration can deviate.

Ergonomic handles stemless with twist shifter

The comfortable ergo grips are cleverly mounted so that the centre of gravity is central to the axis of the hand crank. The gearshift device is a twist grip gearshift and is located on the handle.

Electornic

Illustration can deviate.

System voltage 36 volt

The handbike or power assist device is supplied with 36 volt system voltage.

Other speed options are available.

Illustration can deviate.

Regular charger

This charger has a capacity of 1.35 Ah. Alternatively, we offer a fast charger as an additional option.

Illustration can deviate.

Bike computer and info display

The bike computer displays various information about the ride and the info display can be used to determine the battery capacity..

Illustration can deviate.

Front light

A LED lamp at the front provides illumination of the roadway. It is supplied by the system voltage and therefore does not need to be loaded separately. It is switched on via a control on the handlebar or on the control housing.

Illustration can deviate.

Taillight

The rear light is mounted on the back of the wheelchair. The lighting is operated by a button cell and switched on and off by a switch on the rear light.

Frame and coupling

Illustration can deviate.

Stricker clamping system

With our specially developed Stricker clamp system, our handbikes and power assist devices are quick and easy to attach to any wheelchair - and usually without adapters or modifications to the wheelchair. The wheelchair or owner change can thus take place easily and within a very short time.

The diverse adjustment possibilities of the frame in conjunction with the clamp allow attachment to countless frame shapes, profiles and angles.

Illustration can deviate.

Stricker frame

The frame on the Stricker handbikes and power assist devices, which is made of high-grade bicycle steel with chrome-molybdenum alloy, can be adapted to all needs thanks to the wide range of adjustment options. The frame also allows adaptation with the Stricker clamping system to almost all wheelchairs even without adapters, conversions or stems.

Impeller

Illustration can deviate.

16 inch wheel

The 16-inch wheel is relatively compact, but still offers enough riding comfort.

Illustration can deviate.

20 inch wheel

The 20 inch wheel will overcome most obstacles without problems.

Illustration can deviate.

24 inch wheel

The 24 inch wheel overcomes most obstacles without problems.

Colors

Illustration can deviate.

Black

A slightly standout black with some sheen.

Illustration can deviate.

Matte black

A convincing matt black is always timeless and suitable for any occasion. The matt black blends in with any colour on the wheelchair.

Illustration can deviate.

Metallic silver

The metallic silver shade has a special, robust shine. The subtle color submits to any environment and thus stands out little.

Illustration can deviate.

Blue

Blue looks restrained, cool and businesslike.

Illustration can deviate.

Red

Red is a passionate color, which always puts itself in the center.

Tetra equipment

People with tetraplegia have particularly high requirements. Since many motor skills are often severely limited or no longer function, classic mechanical inputs such as turning the twist grip or pulling the brake cable must be rethought and revised. That is why we offer tetra equipment for most of our handbikes and traction devices. In this equipment form, our products meet the high requirements of tetraplegia without compressing safety aspects.

Equipment

Illustration can deviate.

Coaster brake

The coaster brake is a proven brake with great power transmission.

Planetary gear

The planetary gearbox doubles the available gears and is used for reduction. This is especially useful on hills, on steep slopes, or when there is less power in the arms. It is used in both chain and toothed belt drives.

Illustration can deviate.

Foldable chin gear shift

The chin gear shift makes it possible to shift through the gears via the chin. The chinstrap can also be temporarily folded away for comfortable adaptation of the handbike to create space.

Illustration can deviate.

Tetra star nut

The star nut makes it much easier to tighten the clamp.

Illustration can deviate.

Two 5 kilo weights

The two 5 kilo weights are mounted in parallel. They help to gain traction and prevent the wheel from slipping.

Weights on the fork

The weights are mounted Our weights are attached using the convenient and ever-expandable KLICKfix system. This means that the weights can be attached and removed in a few simple steps. The handling of your stem can thus be adjusted to the respective situation entirely without tools. in pairs on the fork parallel to the wheel. One weight is mounted on each side. This way of mounting the weights ensures maximum traction of the wheel. The weights can be mounted on the fork from a wheel size of at least 12 inches.

Start-up aid

The starting aid is activated by pressing a button and accelerates the handbike for 5 seconds up to a maximum speed of 6 km/h. The button must be pressed for 3 seconds. The button must be pressed for 3 seconds.

Special equipment

Stricker handbikes and power assist devices are adaptable to a wide variety of needs through our large range of equipment options and accessories. On this page you will get a small overview of common equipment options of this model range.

Further equipment options and additional accessories matching the model series can be found in the respective offer form.

Common options

Tetra equipment

In this equipment form, our products meet the high requirements of tetraplegia without compressing safety aspects. Further information can be found under the menu item Tetra equipment.

Children/Youth equipment

In children's or youth equipment, the handbike or power assist device is adapted to the body size. For example, the axle distance and the crank length are changed. The children's/youth equipment is also suitable for microsomia.

Wheel hub motor in the mountain version

The mountain version with 350 watt motor power From an engine power of more than 250 watts, an operating license and appropriate insurance is required in Germany to participate in public road traffic. is designed to cover longer distances with many or wide climbs. The wheel hub motor is a form of drive that is built directly into the wheel. Compared to a mid-mounted motor, there are fewer mechanical components that require maintenance and wear.

Double battery in parallel mounting

Two batteries can be mounted in parallel on the handbike or power assist device and used individually. A switching option for the power supply from the batteries is available.

Planetary gear

The planetary gearbox doubles the available gears and is used for reduction. This is especially useful on hills, on steep slopes, or when there is less power in the arms. It is used in both chain and toothed belt drives.

Illustration can deviate.

Coaster brake

The coaster brake is a proven brake with great power transmission.

Weights on the fork

The weights are mounted Our weights are attached using the convenient and ever-expandable KLICKfix system. This means that the weights can be attached and removed in a few simple steps. The handling of your stem can thus be adjusted to the respective situation entirely without tools. in pairs on the fork parallel to the wheel. One weight is mounted on each side. This way of mounting the weights ensures maximum traction of the wheel. The weights can be mounted on the fork from a wheel size of at least 12 inches.

Individualization

Stricker handbikes and traction devices can be customized. In addition to obvious customization options such as the seat width and the resulting frame size, there are also other ways to personalize the companion. On this page you will get an impression about the individualization possibilities of the product.

Available colors and coatings can be found on the colors and coatings page. All RAL special colours are available at an extra charge.

Colors

Illustration can deviate.

Frame color

On the frame, all the tubes can be colored in any color.

Coatings

Illustration can deviate.

Coating on the control unit housing

The control unit housing can be coated.

Illustration can deviate.

Coating on the mudguard

The mudguard can be coated.

Illustration can deviate.

Coating on the automatic latch

The cap of the automatic latch can be coated.

Illustration can deviate.

Coating on the crank

The cranks can be fully coated.

Illustration can deviate.

Coating on the ergonomic handle

The ergobars of the hand crank can be completely coated.

Illustration can deviate.

Coating on the chain guard

The chain guard can be coated.

Videos

Stricker - Lipo Smart 16"

STRICKER HYBRID Handcycle - Push Mobility

Stricker - Lipo Smart Tetra

Stricker - Lipo Smart english

Installation

[EN] Unpacking Video Stricker Handbikes: Undo transport settings

[EN] Installation Video Stricker Handbikes: Mount handbikes & power assist devices to a wheelchair

Documents

Are you looking for the right documents? We have collected a suitable selection of documents and information under the following links.

General Downloads under downloads.

Unpacking and installation guide under Help & Media.

Certificates under About us.

If you need further documents, we will be happy to help you personally. You can reach us via the contact form or by phone during our opening hours.

Documents for dealers

For dealers and distributors, our images are also available in full size and high resolution for all purposes. Whether on the web or as a print template. Contact us directly to get access to records, pictures, documents and more. We look forward to receiving your request.